SASE Xenith pads are for use when honing and polishing concrete. They come in the following grits:
50 grit – Can be used at the first step in grinding / polishing process. Will remove cure and seal.
100 grit – Removes 50 grit scratches and can be used at the first step in grinding / polishing process on floors that are very flat.
200 grit – Removes 100 grit scratches and will leave a honed matte finish.
400 grit – Removes 200 grit scratches and will leave a honed slightly matte finish.
800 grit – Removes 400 grit scratches and will leave a polished, shiny finish.
3000 grit- Will leave the highest polished finish.